Shop
Showing 193–204 of 250 results
-
Sample Strip Cutter for Tensile Tester
The Sample Strip Cutter is a simple and efficient device designed for preparing paper strip specimens for tensile strength testing. It provides precise and uniform cutting of samples to ensure accurate and consistent test results.
The cutter is equipped with provisions to cut strip samples of 15 mm × 300 mm. It is also available for 25 mm × 300 mm sample sizes, making it suitable for various tensile testing requirements in paper and packaging laboratories.
Dimensions: 22” × 12” × 5”
-
Scuff Resistance Tester
The Scuff Resistance Tester is designed to evaluate the resistance of printed or coated surfaces to rubbing. It operates by rubbing two printed surfaces against each other (face-to-face) in the same plane at a constant speed of 60 RPM under uniform pressure. This test simulates real-life handling and transportation conditions to assess colour transfer, ink abrasion, and surface scuffing in paper and packaging materials.
During testing, the sample is secured to the base of the tester with the printed side facing upward. A 2 psi test weight is applied, positioning the printed surfaces face-to-face. (Customer-specified materials may be used in place of standard samples where required.) The machine is preset to the desired number of cycles—typically 100—and operated according to customer specifications. After completion of the set cycles, the samples are examined for ink transfer, surface damage, or scuff marks.
-
SDC – Blue Wool Fabric Set 1 To 8
SDCE Light Fastness Standards 1–8 (Each pattern size: 15 × 25 cm)
The SDC Blue Wool Fabric Set consists of eight wool fabrics dyed with carefully specified blue dyes to create a standardized light fastness scale. The range represents performance levels from very low to very high light fastness, forming a numerical scale from Grade 1 to Grade 8—where Grade 1 indicates the lowest resistance to light and Grade 8 indicates the highest.
These standards are used to assess and grade fabrics for light fastness by comparing colour change with the Grey Scale for Change in Colour. The results help predict product suitability for specific end uses. Typically, apparel fabrics require a minimum rating of Grade 4, while furnishing fabrics generally require Grade 6 or higher.
The Blue Wool Standards are widely used in the ISO 105 B series of light fastness tests and may also be used in combination with Humidity Control fabric for machine calibration purposes.
To complement the Blue Wool range, specially prepared mounting cards are available. These cards are free from optical brightening agents, ensuring accurate grading without background colour interference. Since background colour can influence visual assessment, the neutral mounting card enhances consistency and reliability in evaluation.
-
SDC Grey Scale for Change in Colour
The SDC Grey Scale for Change in Colour is manufactured and independently tested in accordance with ISO 105 A02:1993 standards. It is approved by leading retailers such as M&S and NEXT for use in their specified test methods, ensuring accurate and standardized evaluation of colour change during colour fastness testing.
-
SDC Grey Scale for Staining
The SDC Grey Scale for Staining is manufactured and independently verified to comply with the requirements of ISO 105 A03:1993. It is officially approved by leading retailers such as M&S and NEXT for use in their specified testing methods, ensuring reliable and standardized assessment of staining during colour fastness evaluations.
-
SDC Martindle Fabric
SDC Martindale Fabric is specially developed for use in Martindale abrasion and pilling tests to evaluate the durability and wear resistance of textiles. Manufactured under strict quality control standards, it ensures consistent and reliable test results. The fabric is widely used in accordance with ISO and other international testing standards for assessing fabric performance under controlled abrasion conditions.
-
SDC Standard Detergent
SDCE Standard Soap is specially manufactured for use in ISO 105 C Series colour fastness tests. The formulation is free from fluorescent brightening agents and is strictly controlled to ensure full compliance with ISO standard specifications.
Produced under high manufacturing standards, the product ensures excellent batch-to-batch consistency, providing reliable and reproducible test results for laboratory applications.
-
SDCE ECE Non Phosphate Type 2 (A)
SDCE ECE Non-Phosphate Type 2 (A) detergent is specially manufactured for use in ISO 6330 domestic washing tests. The formulation is free from fluorescent brightening agents and is strictly controlled to ensure full compliance with ISO standard specifications.
This non-phosphate detergent powder is completely homogeneous, providing excellent batch-to-batch consistency and extended shelf life. It is spray-dried to prevent separation of ingredients, eliminating the risk of inconsistent test results and ensuring reliable laboratory performance.
Additional Information:
- Item Code: 2408
- Delivery Time: Ready Stock
- Packaging: Standard packing available in 2 kg and 15 kg packs
-
Sdce Ece Phosphate (sdce Type 3) (b)
SDCE ECE Phosphate Detergent Type 3 (B) is specially formulated for use in ISO 105 C Series colour fastness tests. It is also specified for performance evaluation of washing machines under IEC 456:1994 and referenced in ISO 10528:1994 test methods.
This phosphate-based detergent powder is free from fluorescent brightening agents, allowing it to closely simulate typical domestic detergent conditions while maintaining compliance with ISO standard requirements. The formulation is strictly controlled to ensure consistent and accurate test performance.
The product is completely homogeneous, providing excellent batch-to-batch consistency and enhanced shelf life. It is spray-dried to prevent separation of ingredients, eliminating the risk of inconsistent results during testing.
Additional Information:
- Delivery Time: Ready Stock
- Packaging: Available in 2 kg and 15 kg packs
-
Shade Card Winding Machine
a) Digital Shade Card Winding Machine
The Digital Shade Card Winding Machine is designed to produce uniform yarn samples of 2” × 6” strip length, as per customer requirements. The machine allows adjustment of traverse length, spacing, and number of threads per inch to achieve precise and consistent winding results.
It is suitable for winding 10 to 12 samples simultaneously, making it ideal for preparing shade cards for textile mills, dyeing units, and quality control laboratories.
b) Digital Shade Card Winding Machine (Motorized)
This motorized model is equipped with a digital display to indicate the number of revolutions for accurate sample preparation. It allows two samples (50 mm size) to be run simultaneously.
The machine is specially designed for preparing samples suitable for Spectrophotometers with hollow specimen holders, ensuring uniform winding and reliable color evaluation results.
-
Sharp Edge Tester
The Sharp Edge Tester is designed to evaluate toys for potential cutting hazards during normal use and after reasonable abuse, as specified under toy safety testing requirements. It determines whether accessible edges present a risk of injury to children. Built with a durable metal housing, the instrument ensures long service life and reliable performance.
The tester features a large footswitch for convenient operation and a special photoelectric sensor that indicates the applied force, ensuring the test force is accurately maintained at 1.35 pounds during testing. This eliminates reading errors caused by visual angle differences in conventional indicators. The unit operates on 220V AC / 50Hz power and includes built-in rechargeable batteries for flexible usage.
-
Sharp Point Tester
The Sharp Point Tester is used to determine whether accessible sharp points on toys may cause injury to children. During testing, the suspected sharp point is inserted into the tester’s small rectangular opening. If the point penetrates to the specified depth, an LED indicator illuminates, confirming that the point is considered hazardous.
This test is mandatory for toys intended for children under 8 years of age and is conducted both before and after use-and-abuse testing to ensure continued product safety.