The Box Compression Tester is designed to measure the resistance of containers to external compressive loads during transit and storage. It is ideal for evaluating the stacking strength of corrugated boxes and other types of packaging containers, ensuring durability and product safety.

The Electronic Box Compression Tester is designed to determine the compression resistance of corrugated and non-corrugated boxes. It provides accurate evaluation of box strength under compressive load, ensuring product safety during stacking, storage, and transportation.

The instrument features a digital display for load and deformation measurement. It is equipped with memory to retain peak values, automatic or manual zero setting, and built-in overload and over-travel protection for safe and reliable operation.

The COBB Sizing Tester (Automatic Type) is designed to determine the water absorbency of paper, paperboard, and similar materials. The Cobb value represents the quantity of water absorbed in a specified time by one side of a unit area of paper or board when placed horizontally under a water head of one centimeter.

This automatic model features a spring-loaded sample clamping mechanism, ensuring uniform pressure and accurate, repeatable test results. It is ideal for use in paper mills, packaging industries, and quality control laboratories.

Dimensions: 12” × 10” × 10”

The Core Crush Tester is designed to measure the crushing strength of paper cores, paper tubes, and bobbins. It determines the maximum pressure that can be applied to the surface of the carrier until it collapses.

During the test, the specimen is subjected to increasing compressive load. The sharp collapsing point is accurately detected, and the crushing strength value is displayed directly on the digital indicator for clear and precise readings.

This instrument is ideal for paper mills, packaging manufacturers, and core production units to ensure product strength, durability, and quality compliance.

The IKON Crush Tester is designed for evaluating the compressive strength properties of paper and paperboard. It is suitable for conducting Ring Crush Test (RCT) for paper with thickness between 0.15 mm and 1 mm, Edge Crush Test (ECT), Flat Crush Test (FCT), and Ply Bond Adhesion Test (PAT) for boards. The instrument can also be used for Corrugating Medium Test (CMT) on tubes with diameters less than 60 mm.

The Digital Stiffness Tester is designed to determine the stiffness and compression strength characteristics of paper and paperboard. The compressive index of a material (failure load per unit width/basis weight) increases with sheet density in a manner similar to the tensile index. Therefore, fibre characteristics that influence sheet density, flexural modulus, and fibre resilience significantly affect stiffness performance.

This instrument is fully microprocessor-controlled with user-friendly, menu-driven software that allows easy selection and setting of test parameters. It features a precise pneumatic clamping system to securely hold the specimen, minimizing human error and ensuring consistent and reliable test results.

The tester enables rapid and efficient determination of compression strength for fluting media and test liners. It is suitable for paper and paperboard with a GSM range of 100–400 and comes equipped with an in-built printer for easy documentation of test results.

Ideal for paper mills, packaging industries, and quality control laboratories.

This instrument is designed to measure the average smoothness, porosity, and softness of paper, paperboard, and films. The test is carried out by determining the time required for a specified volume of air to pass through or over the test specimen under uniform and controlled pressure conditions.

The tester is equipped with an electronic self-starting timer for automatic measurement of air flow through the specimen. The timer starts automatically when the zero mark of the graduated scale passes the reading fork and stops once the predetermined volume of air has passed through the sample, ensuring accurate and repeatable results.

Tensile Strength Tester (Electronic – Vertical Model)

The Electronic Tensile Strength Tester is designed for accurate measurement of tensile strength and elongation (stretch) of paper, paperboard, and similar materials. This vertical model features a digital display for clear and precise indication of test results.

The instrument is equipped with memory to retain peak values, automatic or manual zero setting, and built-in overload and over-travel protection for safe and reliable operation. The dual-screw testing frame provides stable and uniform load application and accommodates larger test specimens across a wide load range.

The Ply Bond Tester is designed to determine the internal bonding strength of paper, paperboard, and laminates. It measures the average energy, expressed in thousandths of a foot-pound, required to delaminate a specimen into two plies, in accordance with TAPPI T-569 reference standard.

The instrument is equipped with a dual-capacity pendulum of 0.25 ft-lb and 0.1–0.5 ft-lb, with readings indicated directly on a calibrated scale for accurate and easy interpretation. It includes a five-station specimen preparation unit, allowing testing of different specimen thicknesses with adjustable clamping pressures ranging from 50 to 200 PSI.

The Sample Strip Cutter is a simple and efficient device designed for preparing paper strip specimens for tensile strength testing. It provides precise and uniform cutting of samples to ensure accurate and consistent test results.

The cutter is equipped with provisions to cut strip samples of 15 mm × 300 mm. It is also available for 25 mm × 300 mm sample sizes, making it suitable for various tensile testing requirements in paper and packaging laboratories.

Dimensions: 22” × 12” × 5”